– Longitud máxima de posicionamiento: 2300-6600 mm (90,55″-259,84″).
Ancho de la mesa: 255 mm (10″).
– Longitud de la mesa de alimentación: 2300-6600 mm (90,55″-259,84″).
– Ancho total de la máquina: 660 mm (25,98″).
– Longitud total de la máquina: 5140-14880 mm (202,36″-585,82″).
– Altura de trabajo: 850-950 mm (33,46″-37,4″).
– Diámetro máximo del elemento cortado: 60 x 60 mm (2,36″x2,36″).
– Voltaje: 230V.
– Potencia: 500W.
– Panel de pantalla táctil: Sí.
– Historial de corte con memoria flash: Sí.
– Sierra en estándar: No.
– Escáner de código de barras en estándar: No.
– Pinzas neumáticas en estándar: No.

Max roll width: 2000 mm
Max roll diameter: 700 mm
Max roll weight: 80 kg
Overall dimensions (LxWxH): 3827x2147x1703 mm ± 30 mm
Voltage: 230 V AC
Power: 1.2 kW

– El dispositivo se basa en el polipasto de inspección WK-2HD y se utiliza para medir y cortar materiales de cortina a la longitud deseada.
– El material se fija con abrazaderas TYP-11 al brazo superior, que se eleva a la altura deseada mediante un sistema de control de pie.
– El material se corta manualmente con un cortador manual OT-1/R.
– Una abrazadera de tela manual mantiene el material en su lugar con imanes.
– Panel de control con pantalla táctil.
– La máquina está equipada con un codificador. Después de establecer la altura deseada y presionar el pedal, el brazo superior móvil se mueve a la altura establecida. Esto permite un ajuste preciso de la longitud de corte del material.

– Voltaje: monofásico, 230 V 50-60 Hz
– Potencia: 1200 W
– Altura máxima: 5200 mm
– Ancho máximo del material: 4000 mm
– Capacidad máxima de carga: 50 kg

Creasing machine - is a device used for bending cardboard sheets, which are marked in places where the cardboard is pre-bent. 

The thickness of the cardboard sheet - about 0.5mm. The number of sheets stacked on the feeder - 600 pcs. The maximum stack height is 295mm.

The machine consists of a welded and bolted steel frame. A pneumatic cylinder is attached to the frame, which exerts pressure on a sheet of cardboard through a punch attached to the handle. 

The handle is mounted on guides with linear bearings. The worktop consists of an aluminum plate mounted on a steel base. In the lower part of the countertop there is a set of pneumatic cylinders, extending two side pressure strips.

The slats are mounted on linear guides and have mounting sockets for screwing side steel clamps. The stamp and clamps are replaceable elements, adjusted to the size of the sheet creases.

Width: 2845 mm
Depth: 1260 mm
Height: 1726 mm
Working height: 1186 mm ± 15 mm
Support: Swivel castor with adjustable foot
Structure execution: Carbon steel + Aluminum profiles
Voltage: 230 V AC
Power: up to 1.4 kW
Working pressure: 5 bar
Weight of machine: 220 kg

- Machine is designed to automatically cut (through user input) pre-set length, and quantity sheets nonwoven fabric from rolls up to 350 kg. - Cut panels are being fed onto the belt conveyor.
- Feed speed is 22m/min (72 ft/m).
- Feed speed is adjustable ±20%.
- Productivity for pieces 1000 mm long and 2000 mm wide (39”x78”) is 500 pcs/hour. - Pneumatic clamp.
- Knife cuts in two directions.
- Blade sharpener.
- Custom machines available to accommodate different sized rolls.
- Control panel with durable buttons and touchscreen.
- Expanding airshaft with strips for cardboard core with material.

- Working pressure: 6 bar (87 PSI).
- Maximum roll width: 2500 mm (98,42”).
- Maximum roll diameter: 1100 mm (43,3”).
- Maximum roll weight: 350 kg (771 lbs).
- Overall width: 3540 mm (139,3”).
- Overall length: 5340 mm (210,2”).
- Overall height: 1845 mm (72,6”).
- Conveyor size: 2500 x 2500 mm (98.42”x98.42”).
- Frame made of steel with anodized aluminium profiles.
- Voltage: 230 V
- Power: 2,8 kW

- Machine is designed to automatically cut (through user input) pre-set length, and quantity sheets of PVC coated fabric from rolls up to 250 kg.
- Cut panels are stored in an easily accessible bin at the bottom of the machine.
- Custom machines available to accommodate different sized rolls.
- Weld-free body is made of powder coated steel with aluminum frame.

- Working pressure: 6 atm (88 PSI)
- Maximum roll width: 2000 mm (78.7")
- Maximum roll diameter: 500 mm (19.6")
- Maximum roll weight: 250 kg
- Overall dimensions (LxDxH): 2982 mm x 1395 mm x 1618 mm (117.4"x54.9"63.7")
- Voltage: 230 V
- Power: 0,5 kW
- Weight: 720 kg

- Machine is designed to automatically cut (through user input) pre-set length, and quantity sheets of PVC coated fabric from rolls up to 250 kg.
- Cut panels are stored in an easily accessible bin at the bottom of the machine.
- Custom machines available to accommodate different sized rolls.
- Weld-free body is made of powder coated steel with aluminum frame.

- Working pressure: 6 atm (88 PSI)
- Maximum roll width: 2000 mm (78.7")
- Maximum roll diameter: 500 mm (19.6")
- Maximum roll weight: 250 kg
- Overall dimensions (LxDxH): 2982 mm x 1395 mm x 1618 mm (117.4"x54.9"63.7")
- Voltage: 230 V
- Power: 0,5 kW
- Weight: 720 kg

Cut to length machine - is a device used to cut materials (using mechanical or ultrasonic knife), both fabric knitted and nonwoven, with a roll width of up to 2000 [mm] and a length up to 50m.

The diameter of the material roll cannot exceed 700mm and. Machine also allows visual inspection of the cut pieces. The machine consists of two parts. The unwrapping part consists of two non-driven expansion shafts supported on bearing holders mounted on a steel frame. The working part consists of a steel top with a drive roller placed under the top and a pneumatic lifetable roller.

The set of these two rollers is the actual drive for the unwinding and moving the material. Right behind the drive rollers there is a clamp, also lifted pneumatically.

When the material is fed, the bar is raised and is pressed after the drive rollers finished moving the piece, just before the cutting starts.

The cut-off form is placed on the transverse swing beam (hanger). Hanging of the materials can be done "alternately", that means that every other cut piece is flipped. Or one can switch the machine to hang each piece on the traverse beam same side.

More Info:

- Working pressure: 6 atm
- Max. material width: 2000 mm
- Max. material diameter: 700 mm
- Max. material weight: 60 kg
- Machine width: 2760 mm
- Machine depth: 2415 mm
- Machine height: 1935 mm +- 30 mm
- Voltage: 230 V
- Weight: 560 kg

Cut to length machine - is a device used to cut materials, both fabric knitted and nonwoven, with a roll width of up to 2000mm and a length up to 50m. 

The diameter of the material roll cannot exceed 1000mm. 

The unwinding part consists of two non-driven expanding shafts, supported on the bearing pins, mounted inside the steel frame. The working part consists of a wooden table top, covered with a laminate.

the drive roller is located in the upper part of the machine, under the table top and the pressure roller is lifted pneumatically. 

The set of these two rollers is the actual drive for the unwinding and moving the material. Right behind the drive rollers there is a clamp, also lifted pneumatically.

While the material is being fed, the clamp is lifted is being pressed down after stopping the drive rollers, just before the machine starts the cut cycle. The cut piece is placed on the transverse swing beam (hanger).

 Hanging of the materials can be done "alternately" (every other cut piece is flipped). Or one can switch the machine to hang each piece on the same side.

- Working pressure: 6 atm
- Max. material width: 2000 mm
- Max. material diameter: 1000 mm
- Max. material weight: 120 kg
- Voltage: 230 V
- Weight: 560 kg

- Designed for precise cutting of fabric strips or trimming.
- Makes it possible to correct the cut made on another machine.
- The ability to improve the quality of a cut made on another machine thanks to the variable knife movement speed and blade rotation speed.
- An adjustable metal bumper allows for a quick and easy way of positioning of the fabric on the machine.
- A wide range of strip cutting - from 4 mm to 50 mm.
- A suction system that holds the fabric piece against the tabletop surface.
- Light curtains and a special system of covers effectively ensure the safety of the operator

Cutting width: up to 2400 mm
Table top width: 2600 mm
The length of the table top of Table length after the cut-off line: 420 mm
Total width of the device: 3240 mm
Total length of the device: 755 mm
Table top height: 900 mm
Cutting speed: Min: 0.3 m/s, Max: 0.5 m/s
Rotación de la cuchilla: 4000 rpm
Blade rotation: 4000 rpm
Voltage: 230 V AC
- Power: 700 W
Ultrasonic knife: -
Circular Knife: Yes
Fabric clamp: Pneumatic one-sided